Starting instructions
Page 37/40
Installation and starting instruction manual
SYCLOPE TRACE’O
®
Signs of « Trace detection » notification area :
:
Indicate waiting of start cycle
:
Indicate started polarization cycle – Up step
:
Indicate polarization cycle – Maintain step
:
Indicate depolarization cycle – down step
:
Alarm Polarization / Depolarization steps
Signs of channel statutes area :
:
Indicate low threshold activated
:
Indicate high threshold activated
:
Indicate a technical alarm
:
Injection of chemistry activated
:
Open phase of 3 ways command
:
Close phase of 3 ways command
:
Indicate « Pause » of all treatments (When tank is empty or flow switch
entry is actived)
Signs of « Last line » area :
->.<-
:
Setpoint of the programmed channel
IX.
Guide and maintenance.
The controller does not require any specific maintenance.
Repairs may only be performed only by qualified technicians, and must be carried out exclusively at
our plant.
If you have any problems with the controller or if you need treatment tips, do not hesitate to contact
our after-sales department.
!