35
Alarting „Vital sign function“
Run. No. Basic settings „Alert function“
Page
1
4.5.1 Switching on the alert function (factory pre-set:
switched on)
17
2
4.5.2 Determining and storing alert call numbers
18
3
4.5.3 Setting alert parameters
19
After this, program and test the vital sign function:
Run. No. Setting and testing the vital sign function
Page
4
5.3.2 Setting the emergency call announcement
24
5
7.3.1 Assigning alert call number(s) to the vital sign function
35
6
7.3.2 Setting date and time
36
7
7.3.3 Activating the vital sign function and setting the time
(interval and time)
36
8
7.3.4 Programming daily key and log-in/out key
37
9
7.3.5 Testing the vital sign function
38
7.3.1 Assigning alert call number(s) to the vital sign function
ATTENTION
In the following procedure it is not the call number itself
which is allocated but instead the memory location in which
the number is stored (see table on the page 18).
Example: If you want to assign the numbers 1 and 2, so
enter 12. If an emergency call is triggered, the numbers are
dialled chosen in order of entries.
Open
Menu
> press
to select „Menu release PIN“
>
Ok
.
Enter 4-digit PIN >
Ok >
„Alerts“ >
Ok
.
Press
to select „Call trigger“ >
Ok
.
Press
to select „Vital emerg call“ >
Ok
.
