© 03MAR 20 SyberSense
1 / 3
DOC ID – 1707 • Rev 01
XPK-01 Keyfob Sensor Manual
Part number:
XPK-01
Description
The XPK-01 keyfob is a battery operated wireless handheld
alarm sensor. When a button is pressed, the associated
command is sent to the panel.
Notes
The keyfob requires that each button is programed with
the desired command (Away, Stay, Disarm, and SOS).
The keyfob has a range of up to 100 ft. Metal, floors, and
appliances may affect the range.
Important safety instructions
Before you program this sensor, be sure to:
Read, keep, and follow all instructions.
When there is a low battery, replace with a compatible
lithium ion battery.
Setup
Use the panel to add and setup the keyfob.
To add the keyfob to the panel:
1. Add the sensor to the panel.
2. Once added, test the sensor.
Look at the panel, and then press Away/Stay.
Notice that the panel begins to arm.
Note: Testing all sensors to the alarm monitoring station
is strongly advised.
Button function
The keyfob has 4 buttons. Once the keypad is added to the
panel, the buttons control the arming and disarm features of
the panel.
Away:
When tapping this button, the panel arms in Away
mode.
Stay:
When tapping this button, the panel arms in Stay mode.
Disarm:
When tapping this button, the panel is disarmed.
SOS:
When tapping this button twice within 3 seconds, the
keyfob sends a panic notification to the alarm monitoring
station.
Battery replacement
The XPK-01 keyfob requires a CR2032 battery. Once the
battery is low, the panel displays a low battery icon next to the
sensor in the devices list. The battery must be replaced within
7 days of the first low battery notification. If the battery is not
replaced within 7 days, the sensor may not function properly.
WARNING:
If an incompatible replacement battery is used, or
the battery is installed incorrectly explosion or damages may
occur.