SY VWP24-18G, Руководство пользователя, Страница: 13 / 16

V1.0 13 sy.uk
Video Selections
The following commands are used to make video selections:
Command Details
SET INx VIDEO OUTy

Select Input
x
to Output
y
Where:
x
is in the either 1 or 2 for inputs A or B
y
is in the range 1 to 4 for VWP24 outputs, or
1 to 9 for VWP29 outputs.
SET INx VIDEO ALL

Select Input
x
to All Outputs
Where:
x
is in the either 1 or 2 for inputs A or B
Examples:
SET IN1 VIDEO OUT2

OUT2 VIDEO IN1

SET IN2 VIDEO ALL

ALL VIDEO IN2

Preset Save and Recall
The following commands are used Save or Recall presets for the video configuration:
Command Details
SET SYS ROUTE-MODE z

Save the current video configuration to preset memory
z
Where:
z
is in the range 1 to 10 for presets 1 to 10
GET SYS ROUTE-MODE z

Set the Video Wall to pre-set
z
Where:
z
is in the range 1 to 10
Examples:
SET SYS ROUTE-MODE 3

SYS ROUTE_MODE 3

GET SYS ROUTE-MODE 7

SYS ROUTE_MODE 7

Test Pattern
The following commands are used to enable of disable the test pattern for each output:
Command Details
SET OUTy TSP ON

Enable the test pattern for Output
y
Where:
y
is in the range 1 to 4 for VWP24 outputs, or
1 to 9 for VWP29 outputs.
SET OUTy TSP OFF

Disable the test pattern for Output
y
Where:
y
is in the range 1 to 4 for VWP24 outputs, or
1 to 9 for VWP29 outputs.
GET OUTy TSP

Read the test pattern setting for Output
y
Where:
y
is in the range 1 to 4 for VWP24 outputs, or
1 to 9 for VWP29 outputs.
Examples:
SET OUT2 TSP ON

OUT2 TSP ON

GET OUT5 TSP

OUT5 TSP OFF
