Swyx SwyxPhone L6 series Скачать руководство пользователя страница 40

Страница: 40 / 206

Telephoning with SwyxPhone L62

Speaker and Handsfree Telephone

This is how you call a subscriber from the Phonebook

Use the arrow buttons to select "Phonebooks" and press the "OK"
button.



The following appears on the display:

Select the relevant Phonebook (Global or Personal) and press the
“OK” button.

In the list, select the subscriber you want to call, and press OK.



You will see additional information about the subscriber (phone
number, name).

Press the "OK" button.



The connection will immediately be made.

For more information on editing entries in your Personal Phonebook,
please see Chapter 8.3.2,

Phonebooks

, page 59.

Phonebook

1>Global

2>Personal

0>Back

Gl. Phonebook XX/YY

><Subscriber>

...

><Subscriber>

0>Back

To make it easier to search for an entry in an extensive Phonebook, you

can enter the first letter of the subscriber’s name. Use the numeric keypad

for example, to enter an “F”, press the “3” button three times, for an “S”,
press the “7” button four times. When a letter is entered, a short beep will
be produced after one second and you can then enter the next letter. If no

further entry is made in the following three seconds, you must once again

begin with the first letter for the next search.

6.17

Speaker and Handsfree Telephone

To enable all those present in the room to follow a telephone conversa-
tion, you can use the speaker. To allow those present to participate in the

conversation too, you also have a complete Handsfree Telephone

(speaker and microphone).

6.17.1 Activating/Deactivating the Speaker During a Call

You are telephoning and using the handset.

This is how you activate/deactivate the speaker during a call

Press the Speaker button



The Speaker button glows. The speaker is active. The call will
continue via the microphone in the handset.

Press the Speaker button again to continue the conversation on the
handset.



If you hang up while the speaker is active, the call is ended and
the Speaker button goes dim.

6.17.2 Activating/Deactivating the Microphone During a Call

You are telephoning and using the handset.
You want to interrupt the call briefly. You don't want your call partner to

hear you during the pause.

This is how you activate/deactivate the microphone during a call

Press the Microphone button



The red LED on the “Microphone" button lights up. Your call
partner cannot hear you.

If you press the “Microphone" button once more, the microphone
will be reactivated.

You can also switch the speaker on or off via the menu during a call.

Содержание SwyxPhone L6 series















































































































































































































Результаты поиска

Содержание SwyxPhone L6 series

Отзывы:

Похожие инструкции для SwyxPhone L6 series

Бренды по названию

Популярные бренды

Swyx SwyxPhone L6 series, Пользовательская документация

Результаты поиска

Содержание SwyxPhone L6 series

Отзывы:

Похожие инструкции для SwyxPhone L6 series

Бренды по названию

Популярные бренды