Swyx SwyxPhone L420, Пользовательская документация

Страница: 88 / 164

SwyxPhone for Experts 88
This is how you end a conference
Assumption: You have started a conference and the conference line has an “active” state, i.e.
you can speak to the other conference participants.
1. You have several options:
• If the conference line is active, simply go on hook.
• If the conference line is on hold, click with the right mouse button on the Line button and
select the entry “Terminate Conference”.
1. Simply go on hook.
The conference is ended. The line is free again and the LED for the “Conference” button
goes out.
If Subscriber A of the original conference added other subscribers, e.g. B and C, to this
conference, a second conference between A, B and C will continue to exist until Subscriber A,
as initiator of the second conference, terminates the connection and thus ends the conference.
6.7.4 Conference Rooms
Conference rooms are set up by the administrator. A number is assigned with which the
conference room can be "entered". In contrast to a conference held only via SwyxIt!, all
participants can leave the conference independently of one another, without the conference
being terminated. All subscribers can then dial this Conference Room and participate in a
conference with other users, who have dialed this number. You can enter a Conference Room as
a member of a conference or as a listener (see chapter 6.7.4.1,
Silent conference
participation , page 89).
This is how you reach a Conference Room
Assumption: Your administrator has set up a Conference Room.
1. Dial the number of this Conference Room.
You will be connected to the conference. All participants in the conference room will hear a
welcome signal.
If you are the only conference participant, an appropriate announcement will be played.
2. To leave the conference, simply go on hook.
All those present in the Conference Room will hear a goodbye signal. The conference
between the other subscribers continues to exist.
You can also start Inquiry Calls from a Conference Room (see This is how you start an Inquiry
Call from a conference , page 86).
Furthermore, you can add other subscribers to this Conference Room (see This is how you add
an additional subscriber to a conference , page 87).
Please remember that in this case, all of the conference participants you have added will also
leave the conference with you.
In addition, you can connect another subscriber to the Conference Room. This subscriber is then
an independent member of the conference and must end the connection to this conference
himself.
End Conference
Reaching a
Conference Room