Swyx SwyxPhone L420, Пользовательская документация

Страница: 124 / 164

SwyxPhone Settings 124
Due to the fact that both SwyxPhone and SwyxIt! access the same user settings, any changes
you make on SwyxPhone will always effect the settings in SwyxIt! and vice versa. Above all,
you should keep in mind that if you delete lines or Speed Dials, the data will be lost!
For further information please refer to chapter 8,
Interaction with SwyxIt! , page 127.
The SwyxWare CD includes label templates for the SwyxPhone L4xx models: you can adapt
these templates to your key configuration and print them.
7.7.1 “Dial immediately”, “Successive dial” or “Intercom Connection”?
The Speed Dials provide you with several options for initiating a connection.
Dial immediately
If the option “Dial immediately” is activated, the subscriber will be called immediately once the
Speed Dial has been pressed, even if the handset is on hook. In this case the handsfree telephone
will be activated.
Please note that your telephone must be equipped with a microphone. Otherwise only the
speaker will be switched on, i.e. if you would like to speak to the other subscriber, you must lift
the handset.
If this function has been deactivated, the subscriber will not be called immediately and,
therefore, you have the option of entering additional numbers using the keypad or via the
Phonebook.
Successive dial
If the “Successive dial” option is activated, the numbers which have already been dialed
(display contents) will be kept when the Speed Dial is pressed and the number stored on the
Speed Dial will be added. If this function is deactivated, the numbers already dialed will be
deleted and only the stored number will appear on the display.
Both of these functions are especially useful if you frequently use cost-efficient call-by-call
numbers. Just assign a call-by-call number to a Speed Dial and you will then be able to save
both time and effort when you dial the telephone number you want. You can also assign a
project number to a Speed Dial and then always press this before you dial a number if you
would like to associate a call to a particular project.
Intercom Connection
Intercom connection allows you to directly speak to an internal subscriber, who allows his status
to be signaled to you, i.e. without him having to pick up the call. If you press the Speed Dial on
which the Intercom connection is activated, the corresponding number will be dialed and an
intercom signal is produced for the called subscriber. The telephone or SwyxIt! then
immediately activates the line and the speaker. You can then begin your intercom connection to
this subscriber.
If the called subscriber lifts the handset, you can continue the call as a normal telephone call.
If the subscriber does not signal you his status, you cannot initiate an intercom connection.