Swyx SwyxPhone L420, Пользовательская документация

Страница: 100 / 164

SwyxPhone Settings 100
7.2 Settings in the Main Menu
7.2.1 Forwardings
The option “Forwarding” allows you to define whether telephone calls should be
• should be forwarded unconditionally or
• should be forwarded with a delay, i.e. after you have allowed the telephone on your desk to
ring for a certain period of time, or
• should be forwarded if your line is busy (you are presently telephoning).
Furthermore, you can define whether incoming calls should be forwarded specifically to another
subscriber or to your Standard Voicemail using the “Forwarding” button.
For further information please refer to chapter 5.15,
How do I forward a call? , page 61.
Activate the option “Immediate”, if you do not wish to receive any calls starting immediately
(this is equivalent to activating the “Forwarding” button on the user interface).
When you activate the option “If busy”, you must define how a call should be handled if it
cannot be delivered to you because you are already on the telephone and no secondary call is
permitted. You can either enter the forwarding destination directly, or make a selection from the
Phonebook, or activate your Standard Voicemail. When a call is received, SwyxPhone
automatically recognizes whether the line is free or busy and it applies the appropriate type of
Call Forwarding. This requires, however, that the secondary call be switched off.
The “Delayed” option is used to set the amount of time which should be spent attempting to
transfer the call directly to the device to which you have logged on. The call can then be
forwarded to another number or to your Voicemail.
Your Voicemail can only be configured using SwyxIt!. For further information, please refer to
the SwyxIt! documentation.
7.2.2 Do Not Disturb
The option “Do not disturb” is the same as Forwarding Unconditional of an incoming call to
your Voicemail (see chapter 5.15.1,
Call Forwarding Unconditional , page 61). If you confirm
this menu item with 9 , this function will be switched on or off.
7.2.3 Secondary call
If you activate this option with 9 , no other calls will be displayed while you are on the
telephone. It is also possible to switch Secondary Call on or off during a call. A subscriber who
tries to call you will then hear either the busy signal or his call will be forwarded according to
your settings under “Forward Busy”. For further information please refer to chapter 5.14,
The
Secondary Call , page 61.