switel DFT 137 series, Руководство по эксплуатации, Страница: 83 / 108

71
Preparing the Telephone
83
2 Preparing the Telephone
Safety information
Attention: It is essential to read the Safety Information in
Chapter 1 before starting up.
Checking the package contents
The package contains:
Content
DFT 137X model
DFT
1371
DFT
1372
1
DFT
1373
1
DFT
1374
1
Base station with power adapter
plug 1 1 1 1
Charging station with power
adapter plug − 1 2 3
Handset 1 2 3 4
Telephone connection line 1 1 1 1
Battery pack 1 2 3 4
Operating instructions 1 1 1 1
Connecting the base station
Attention: Position the base station at least 1 m away from
other electronic devices, otherwise there is a risk of mutual
disturbance.
Connect the base station as illustrated in the diagram. For reasons of
safety, only use the power adapter plug and telephone connection line
supplied.
Mains power outlet
Telephone line socket
Important note
Your phone’s base station is supplied with an energy−efficient swit-
ching power supply SSA−5AP−09EU060060 (Input 100~240 V
AC
, Out-
put 6 V
DC
, 600 mA). The adaptor input power without load is approx.
0.15 W. The average efficiency is approx. 65 %.
The electrical consumption of the base is:
− in operation mode (idle/call): approx. 1.5 W
− during charging of the handset: approx. 2.5 W
The charger(s) delivered with a telephone set is/are supplied with an
energy−efficient switching power supply S002CV0600030 (Input
100~240 V
AC
, Output 6 V
DC
, 300 mA). The adaptor input power wi-
thout load is approx. 0.15 W. The average efficiency is approx. 60 %.
The electrical consumption of the charger is:
− without handset charging: approx. 0.15 W
− during charging of the handset: approx. 1.2 W
1
Visit www.switel.com to find out whether the telephone set is al-
ready available.