35
Operating Elements
48
Attaching the belt clip
Press the belt clip on the rear side of the
handset at the top, until it audibly snaps
into place.
Charging the batteries
Before the handset is used for the first time, insert it in the base/charging station
for
at least
15 hours.
When the handset is inserted in the base/charging station properly, you will hear an acoustic
confirmation signal and the charge control lamp lights up. The handset warms up during the
charging process. This is normal and does not represent a risk. Do not charge the handset
with charging units from other manufacturers.
The current
battery charge status
is indicated in the display:
Full
Half empty
Low
Empty
Setting the display language
Select a language (cf. Menu Structure"):
> SPRACHE >... (
> LANGUAGE >...)
Setting the time and date on the handset
The time and date are set via the menu. Refer to Page 55 for the sequence of menu option
selections.
Private branch exchanges
The information on Page 56 explains how to install your telephone in a private branch ex-
change.
Low−radiation operation (ECO mode)
The level of radiation is considerably lower than that of standard DECT cordless
telephones when in Standby mode (when the handset is on the base station).
3
Operating Elements
The buttons in this operating manual are subsequently depicted with a uniform contour.
Therefore, slight deviations in the appearance of the symbols on the telephone buttons
compared to those depicted here are possible.
Base station
1
Charging contacts
2
LED, phone is ringing"
3
Paging button with LED
1
3
2
