− Extras −
252
12
Extras
12.1
Alarm clock
The Alarm clock" function can be used so that you are woken up by the
handset at a specific time. The signal tones and volume cannot be
adjusted with this function.
12.1.1
Switching the alarm clock on/off
Proceed as follows to set a time and switch the alarm clock on and off:
,
&
,
Select menu and confirm
,
Select function and confirm
or
,
Select setting and confirm
,
,
Set the time and confirm
12.1.2
Operating the alarm clock
You can either stop the alarm signal or use the snooze function to stop
the alarm to be reactivated 10 minutes later to wake you again.
Activate the snooze function
Stop alarm clock signal
12.2
Baby monitor
If you have two CD738 handsets at your disposal, they can be used for
baby monitoring".
12.2.1
Switching baby monitoring on/off
,
&
,
Select menu and confirm
!
,
Select function and confirm
,
Select setting and confirm
,
End the function
12.2.2
Operating baby monitoring
In order to monitor a room, place one of the handsets in the room to be
monitored. Activate the baby monitoring" function on this handset. No
further internal or external calls are signalled by this handset from this
point. You can then establish a connection to this handset from another
handset and acoustically monitor the room.
*
,
or
Dial the internal number of the
handset
Содержание CD738
Страница 279: ...279...
