![Swisscom Top E604 ISDN Скачать руководство пользователя страница 122](http://html1.mh-extra.com/html/swisscom/top-e604-isdn/top-e604-isdn_user-manual_1415095122.webp)
120
Operating with other devices
CX 253i / SWZ PTT en / A31008-X353-P100-1-19 / devices.fm / 03.12.2007
De-registering handsets
Gigaset Repeater
You can increase the range of your handsets with the Gigaset Repeater V2. You can
operate up to six repeaters on your base station. To ensure the repeater is installed
correctly, repeater capability must be activated on the base station.
Activating/deactivating repeater mode
You can use this function to activate and deactivate repeater mode.
By factory default, this repeater capability is deactivated.
i
Open the menu.
s
Set base
Select the menu item and confirm.
s
Settings
Select the menu item and confirm.
~
Enter system PIN if required (page 89).
s
Setup user
Select the menu item and confirm.
s
De-reg. device
Select the menu item and confirm.
s
Int.16
Select the handset that you wish to de-register and
confirm, e.g.
Int.16
.
j
Hold
down. Return to the idle state.
OK
OK
OK
OK
OK
OK
i
Open the menu.
s
Set base
Select the menu item and confirm.
s
Settings
Select the menu item and confirm.
~
Enter system PIN if required (page 89).
s
System settings
Select the menu item and confirm.
s
Spec. function
Select the menu item and confirm.
s
Repeater
Select the menu item and confirm.
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
NEXT
Press the display key to save the setting. The handset
goes off briefly (
‰
= activated).
OK
OK
OK
OK
OK
OK