![Swisscom Top E604 ISDN Скачать руководство пользователя страница 100](http://html1.mh-extra.com/html/swisscom/top-e604-isdn/top-e604-isdn_user-manual_1415095100.webp)
98
System settings
CX 253i / SWZ PTT en / A31008-X353-P100-1-19 / settings_bs.fm / 03.12.2007
Setting up rejecting for the entire MSN group
You can reject an external call not only on your base station, but for all members of an
MSN group. Pressing
REJECT
will give the caller a busy signal instead of a ringing tone.
The entire group will no longer be called. A waiting call can also be rejected during a
call. The call is added to the caller list.
By factory default, the function is not activated.
Diverting calls
Diverting internal calls
By factory default, internal call diversion is deactivated.
Setting up the forward destination
i
Open the menu.
s
Set base
Select the menu item and confirm.
s
Settings
Select the menu item and confirm.
~
Enter system PIN if required (page 89).
s
ISDN settings
Select the menu item and confirm.
s
Reject all
Select the menu item and confirm (
‰
= activated).
j
H
old
down (back to idle status).
OK
OK
OK
OK
OK
i
To make this function easier to use, you can also set one of the function
keys accordingly (page 114).
i
◆
Only one forward destination can be selected for internal call
diversion.
◆
Only one-level call diversion is supported: If the subscriber to whom
you divert your calls has activated their own call diversion, this is no
longer effective. The forwarded call will ring at the party you diverted
it to.
i
Open the menu.
s
Set base
Select the menu item and confirm.
s
Forward. base
Select the menu item and confirm.
~
Enter system PIN if required (page 89).
s
Forward. dest.
Select the menu item and confirm.
s
Int.11
Select internal number, e .g.
Int.11
.
(
‰
= activated).
OK
OK
OK
OK