4
Operating the handset
Handapparat Classic S112 / SWZ englisch / A31008-M1605-F151-7619 / main.fm / 08.04.2005
Charging the battery pack
To charge the battery pack, leave the handset in
the charging cradle for approx. ten hours. The
battery pack is now fully charged.
The charging display can only be displayed
correctly if the battery pack is first fully charged
and discharged by use.
¤
Do this by leaving the handset in the charg-
ing cradle,
uninterrupted
, until the battery
symbol no longer blinks on the display. Your
handset need not be switched on for it to
charge.
¤
Take the handset out of the charging cradle
and only put it back in when the battery
pack is completely dead.
Please remember:
Always repeat the charging and discharging
procedure if you remove the battery pack from
the handset and insert it again.
Charging is electronically controlled to prevent
overcharging. The battery pack will become
warm during charging; this is normal and is not
dangerous. Its charging capacity will reduce
technically after a certain amount of time.
¤
Set date and time (see Menu overview,
page 9), to e.g. show the correct time when
calls come in.
Your phone is now ready for use.
Switching the handset on/off
a
Press and
hold
the end call key
(confirmation beep).
If you place a deactivated handset in the base
station or charger, it will automatically activate.
Activating/deactivating the keypad
lock
#
Press and
hold
the hash key.
You will hear the confirmation beep. The
icon
Ø
appears in the display when the
keypad lock is activated.
The keypad lock deactivates automatically
when you receive a call and activates again
after the call.
Operating the handset
Control key on the handset
1 Display functions
2 Control key
In this user guide, the point on the control key
that is to be pressed in the respective operating
situation, is always marked in black (top,
bottom, right, left). Example:
t
for "press the
top of the control key".
The control key has a number of different
functions:
When the handset is in idle status
s
Open the directory.
t
Set the handset ringtone volume
(see also Menu tree, page 9).
In lists and menus
t
/
s
Scroll up/down line by line.
In an input field
t
/
s
Move the cursor
left
or
right
.
During an external call
s
Open the directory.
t
Change loudspeaker volume.
Using display functions
The current display functions are shown
inversely in the lowest display line (e.g.
Edit
).
u
/
v
Launch left / right display func-
tion.
Return to idle status
You wish to return to idle status from anywhere
in the menu:
¤
Press the end call key
a
and hold.
Or:
¤
Do not press any key: After 2 minutes the
display will
automatically
revert to idle
status.
§§§§INT §§
§§Menu
1
2
