20
Aton CL401 ISDN / SWZ-EN / A31008-M395-F151-1-2X19 / telefony.fm / 7.5.08
Ve
rs
ion 4,
16
.09.
2005
Defining the settings for
the next call
Depending on your network provider, you
can make the following settings for the
next call:
u
Withhold the number (CLIR), provided
the "Withhold calling line identification
on a case-by-case basis" feature is sup-
ported by your network provider.
u
The setting will revert to the default
when the call ends and your number
will be displayed once again, even if
you dial the same number again from
the last number redial list.
u
To find out how to withhold your
number for all calls, see page 55.
u
Determine the send MSN. You have
determined an individual send MSN for
a handset (page 54), but you want to
select a different MSN as the send MSN
for the next call.
u
Activate/deactivate the Keypad
Making settings
v
¢
ê
¢
Next Call
¤
Change multiple line input:
Anonymous
Select
Yes
or
No
.
MSN
Select send MSN. The next call uses this
MSN, which is also transmitted to the
participant you are calling as number
information.
Keypad
Select
Yes
or
No
.
§Dial§
Press the display key.
~
Enter number.
c
/
§Dial§
Press the talk key or display
key.
Ringback when the number is
busy (CCBS)/ when there is
no reply (CCNR)
If the person you are calling does not
answer or their line is busy, you can initi-
ate ringback.
Precondition:
The exchange supports this
feature.
Activating ringback
§Ringbck.§
Press the display key and wait
for confirmation from the
exchange.
Time of the ringback:
u
Ringback when busy – CCBS:
CCBS = Completion of calls to busy sub-
scriber. The ringback will take place as
soon as the subscriber in question ter-
minates the current call.
Ringback when there is no reply –
CCNR:
CCNR = Completion of calls no reply.
The ringback will take place as soon as
the subscriber in question has made a
call.
Please note:
u
The ringback request is automatically
cancelled after about 2 hours (depend-
ing on the exchange).
u
If you are making a call at the time of
the ringback, the ringback will be post-
poned until you have ended your call.
u
Ringbacks are not diverted if an internal
call diversion is active.
Activating ringback for external
consultation calls
You want to establish an external consul-
tation call (page 22). The consultation call
participant's line is busy. You can activate
a ringback:
§Options§
Open menu.
Ringback
Select and press
§OK§
.
