12
First steps
Aton CL113 Duo / Swisscom en / A31008-M2202-F151-1-2X19 / starting.fm / 07.07.2011
V
e
rsion 4, 16.0
9
.2005
Setting up the handset for use
The display is protected by a plastic film.
Please remove the protective film!
Inserting the battery and closing the battery cover
Warning
Use only rechargeable batteries recommended (
page 46), as this could oth-
erwise result in significant health risks and personal injury. For example, the
outer casing of the batteries could be destroyed or the batteries could explode.
The phone could also malfunction or be damaged as a result of using batteries
that are not of the recommended type.
¤
Insert the batteries with the
polarity in the correct direction.
The polarity is indicated in the
battery compartment.
¤
First insert the battery
cover at the top
a
.
¤
Then press the cover
b
until it clicks into place.
To open the battery cover, for
instance to replace the batteries,
insert a coin into the cavity on the
casing, then pull the battery cover
in an upward direction.
a
b
