Swiss Timing SCAIDER Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 24

Swiss Timing SCAIDER Скачать руководство пользователя страница 7

Swiss Timing LTD

Phone +41 32 488 36 11

P.O. Box 138, Rue de l’Envers 1

[email protected]

CH-2606 Corgémont - Switzerland

www.swisstiming.com

2.2

Network cabling with OSV Star

The SCAIDER camera software communicates with OSV Judgment and OSV Acquisition computers through a 2nd LAN
Network over the USB3 Ethernet adapter.

The picture below is an illustration of a complete OSV-Star – SCAIDER system. Each computer has two network
connections:

1)

The integrated Ethernet card is used to connect to a camera and receive images.

2)

The USB3 Ethernet card is used to exchange the following data:

-

Time of the image to be displayed simultaneously on OSV-Judgment software and the SCAIDER software.

-

Information about race progress (Enter race, Start race, Exit race) sent from OSV Acquisition software to control
the SCAIDER software (Automatic mode).

2.3

Dongle

The small USB dongle is the hardware key which enables the SCAIDER software.
Plug it into a USB 2.0 port. Without the dongle the software will display an error message box and quit Software.

Put the USB dongle in a safe place between competitions

«
...
5
6
7
8
9
...
»

Содержание SCAIDER

























Отзывы:

Нет отзывов