ELECTRONIC START SYSTEM / E-GUN & StartTime V
Version 1.2
3481.560.02
Page 9
2.2
Operation
Stand alone operation with TIMER (Quantum)
1.
Connect
or SMU to E-GUN/MICRO
2.
Connect the cable from TIMER to START.
3.
Turn the unit ON by pressing the
key (5sec.).
SMU : LEDs are tested.
: LEDs are tested.
4.
Select sport (Athletics, Swimming, Speed Skating or Custom).
After 5 seconds, the sport will be automatically selected based on the last use.
SMU : STV power ON status Green LED light up and red LED SPEAK in the microphone should be lit.
: STV power ON status Green LED light up.
5.
Adjust the OUTPUT VOLUMES on the StartTime V to an appropriate level
Speaker Int.
Speaker Ext.
Headset
Line Out
6.
Adjust the INPUT VOLUME on the StartTime V to an appropriate level
Microphone
7.
Check if READY signal green LED on
or SMU is ON.
8.
Check if EXTERNAL READY is written on the StartTime V display.
9.
Press the TRIGGER (
) or START (SMU) button.
10.
One signal should be emitted from the loudspeaker(s), and the TIMER should be activated.
If a false start is to be announced, press the TRIGGER (
) or START (SMU) button again within time
selected in False Start Setup Timeout .
Timeout can be adjusted on the main unit in
Setup
False Start Setup Timeout
.
Repeat can be adjusted on the main unit in
Setup
False Start Setup Repeat
.
False Start Sound can be adjusted on the main unit in
Setup
False Start Sound
.
The false start Timeout signal is only functional if Setup is selected from 1 to 90 seconds.
Select False Start Setup to OFF if false signal is not used.
The Repeat false start signal can be adjusted from 1x to 5x . Select False Start Setup to OFF
if false signal is not used.
