Swiss Timing CONSOLE SATURN WP, Руководство пользователя

Страница: 27 / 33

CONSOLE SATURN WP
Version 2.2 3403.504.02 Page 23
If some counters need to be reset to zero, choose:
[Reset Team Fouls only]
Sets the amount of team fouls back to 0.
[Reset Fouls & Time Out]
Sets the amount of team fouls and amount of Time Outs
used back to 0.
[Reset Time Out only]
Sets the amount of Time Outs used back to 0 for each team.
[No reset]
Nothing is reset to 0.
You can then choose the following data:
NP = No Pause
, by pressing this key, there will be no pause time displayed on the board, the next game
period will be displayed automatically.
P1, P2, P3 , by pressing one of these keys, the pre-programmed pause time will be displayed on the
board. When the pause time is over, it automatically goes onto the next game time. By pressing the ESC
key, the pause time is stopped and the change on the next game time is done automatically.
6.1.11 Pause
When the game is stopped and at any time, it is possible to introduce a count down (or pause or time out)
of a certain duration. This is very useful, for example, to indicate the beginning of the match or the
remaining warm-up time.

Press the key then [Pause].

Select the duration of the pause using [Minutes] and [Seconds].

Validate the duration of the pause by pressing the key . The duration of the pause is now
displayed on the screen and on the board.

At the end of the pause the display and the board show the game time again.

Press to cancel a pause in progress.
6.1.12 End of game
When the last period is finished, press on the key ; a screen will ask you if you wish an extra period:
Extra period ?
Answers
to end the play. The console will show GAME OVER and it will not be
possible to start the game time again.
to enter the first extra time.
When the console shows GAME OVER or at any other moment, press the
key to exit the game :
Would you exit the game ?
Answers
to stay in the game
to leave the game
To start a new game, it is essential to leave the current game first.