background image

—  4  —

When using electrical products, especially when children are present, basic safety precautions should always be followed:
1. The appliance is not to be used by people (including children) with reduced physical, sensory, mental capabilities, or lack of     
    experience and knowledge, unless they have been given supervision or instruction. 
2. Children should be supervised  and instructed not to play with the appliance.
3. Cleaning and user maintenance shall not be done by children without supervision. 

READ ALL INSTRUCTIONS BEFORE USING

DANGER

 - To reduce the risk of electrocution:

1. Do not use while bathing.
2. Do not place or store product where it can fall or be pulled into a into a tub or a sink. 
3. Do not place in or drop into water or other liquid. 
4. Do not reach for a product that has fallen into water. Unplug immediately. 
5. Do not wash the main unit or electrical plug with water or detergent. 
6. Do not handle the electrical plug with wet hands. 
7. Do not put a hand or other object over the outlet of air dryer or block the outlet of air dryer. 
8. Never disassemble, repair or modify this product. 
9. During installation, disassembly, repair and maintenance of the product, the power plug must be switched off and water supply be                                                                              
   shut off. 

WARNING

 

- To reduce the risk of burns, electrocution, fire, or injury:

1. Close supervision is necessary when this product is used by, on, or near children or invalids. 
2. Use this product only for its intended use as described in this manual. Do not use attachments not recommended by the            
   manufacturer. 
3. Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or       
    dropped into water. Return the product to a service center for examination and repair.
4. Keep the cord away from heated surfaces. 
5. Never use while sleeping or drowsy. 
6. Never drop or insert any object into any opening or hose. 
7. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered. 
8. Connect this product to a properly grounded outlet only. See Grounding Instructions. 
9. Do not throw cigarettes or other burning stuff into toilet, it may cause a fire. 
10. This product is an electric appliance, so it must be placed far away from water. 
11. Do not lay the product on side or upside-down during the electrical circuit. 
12. It is prohibited to use other electric appliances in the same socket. 
13. It is forbidden to use the power extension or unstable loose outlet. 
14. An old aging water supply hose cannot be used, otherwise it might cause leakage, fire or electrical shock. Installation of the seat   
    should include specified components and new water supply hose.

SMART SEAT BIDET 

   INSTALLATION INSTRUCTIONS

Содержание SM-STS21















Отзывы: