2. Cut Front of Cabinet
·
Measure the height of apron front, add 1/16” to the dimensions when marking base cabinet
front cutting location.
·
Use saw to cut.
ALWAYS WEAR PROTECTIVE GEAR WHEN USING DANGEROUS MATERIALS
— 5 —
3. Install Sink
·
Carefully place sink into the opening protruding about 1-2 inches from the edge of the cabinet. The weight
of the sink should be sustained by the pre-built support frames.
·
Use sealant to seal any gaps where required.
·
Verify sink is leveled from side to side and front to back using a level tool. Use shims, if needed, to level sink.
FARMHOUSE SINK
INSTALLATION INSTRUCTIONS