SWING BEAM
SWING HANGERS - INSTALL
You may need to tap with hammer to get though holes.
Swing Hanger Bolt
Flat Washer
Spring Clip
Swing Hanger
Swing Hanger
Swing Beam
Flat Washer
Final position of each Spring Clip is
perpendicular to swing beam.
IMPORTANT!
Lock Nut
Cap
1-3/8"
Washer
2 Threads MIN.
Use a socket
wrench to tighten
Lock Nut securely
against washer.
Swing Hanger Bolt must protrude at least
TWO Threads beyond Lock Nut.
IMPORTANT!
Lock Nut
1-3/8" Washer
HOLD position of
Swing Hanger while
tightening Lock Nut.
Final position of each Spring Clip is
perpendicular to swing beam.
IMPORTANT!
x1
3-3/8 x 5-3/ x 95"
2502-CC
2194
x4
NOTE:
You may need to tap
hanger w
ith
a
hammer to get th
r
ough
beam.
SWING BEAM
SWING HANGERS
Lock Nut
Cap
1-3/8"
Washer
2 Threads MIN.
Use a socket
wrench to tighten
Lock Nut securely
against washer.
Place Cap on threads
after tightening
Swing Hanger Bolt must protrude at least
TWO Threads beyond Lock Nut.
IMPORTANT!
Lock Nut
1-3/8" Washer
HOLD position of
Swing Hanger while
tightening Lock Nut.
Final position of each Spring Clip is
perpendicular to swing beam.
Swing Beam
IMPORTANT!
x1
3-3/8 x 5-3/ x 95"
2502-CC
1. Attach Swing Hanger(s) to swing beam as shown.
PF 6299
2 5/8’’x 5-3/8’’x 93’’
Swing Beam
1-1/4"
SCREW
AND SWING HANGER
ADDEDNDUM
!! IMPORTANT - READ THIS ADDENDUM FIRST !!!!
THERE ARE NO 1-1/4" WOOD SCREWS IN
THE
FASTENER
BAG
S.
YOU WILL USE THE
1-3/16"
SCREWS.
USE THIS SWING HANGER INSTALL
ADDENDUM IN PLACE OF THE SWING HANGER INSTALL
METHOD IN
YOUR PLAYSET INSTRUCTIONS.
YOU MUST USE THE QUICK LINK SUPPLIED
TO INSTALL YOUR SWINGS.
© Swing-N-Slide Inc.
LDR
7-
10
-2018
LA
9
466
Cap
1-1/4”
1-3/16”
WHEREVER YOUR INSTR
UCT
IONS
CALLOUT USING THE 1-1/4"
SCREW
USE THE 1-3/16" SCREW
