background image

Quick Start Guide

Charging ProPoint

To charge your ProPoint Mouse:

1.

1.

2.

3.

 

Plug the USB Charger into a USB 

port on your computer or into 

a USB charging accessory.

2.

 

Dock the mouse onto the charger.

The battery LED will flash green while charging & stop flashing 

once fully charged. The first 60 seconds of charging will give 

up to one hour of use. A full charge can take up to 90 

minutes, giving up to 2 weeks of use. To begin using the mouse,

move the switch on the underside to the 

ON

 position

Connecting ProPoint via Bluetooth

Once the mouse is fully charged, you can pair it to your

computer via Bluetooth. Remove the USB Charger/Receiver.

Leave the mouse 

OFF

 for the first steps. 

1.

 

 

2.

 

 

3.

 

Remove any existing “

ProPoint

” entries

in the list by selecting it, then select 

Remove

.

4.

 

5.

 

When “

ProPoint

” appears in the list of devices, click on it

to pair your mouse.

If                     does not appear, check that your system

supports Bluetooth 4.0 (or later) & that Bluetooth is enabled.

Please note that Windows 7 does not support Bluetooth 4.0, 

however you can purchase a USB Receiver which will work on 

Windows 7.  Accessories can be purchased from the Swiftpoint 

store (www.swiftpoint.com) & other approved outlets.

ProPoint

 

USB Charger/Receiver

Ensure Bluetooth is switched on, on your device.

Go to the Bluetooth device menu in your system settings

- Windows:  Settings > Devices > Add Bluetooth device

- MacOS/iOS:  System Preferences/Settings > Bluetooth

Plug 

the USB Charger/receiver into your computer. 

Charge 

your mouse for at least 2 minutes before using.

Switch 

On 

using the switch on the bottom of the mouse.

For more tips & videos, visit 

   www.swiftpoint.com/600

Configuring ProPoint on PC/Mac

Open browser, click in URL box & type: 

www.swiftpoint.com/download-propoint-drivers

Follow the on-screen instructions 

1.

 

2.

 

 

 

 

Left-click (front)

Right-click (center)

Middle-click (rear)

Thumb grip

LED

Middle 

fi

nger 

grip 

Scroll-wheel

Docking 

point

Switch

Connecting ProPoint to iPad Applications

1.

 

 

2.

 

Launch your supported remote desktop app, & start

remote session. 

Pair your ProPoint to your iPad over Bluetooth (see above).

6.

 

If you have a problem, switch the mouse 

OFF 

& try again

from step 1.

ProPoint Features

Connecting to more than one Bluetooth device

 
 

ProPoint can store pairings with up to three separate 

Bluetooth devices.

When switched on, the mouse will first try to reconnect with

the most recently used device. If this cannot be found it will 

try to connect to the next device in the list. 
If two or more of ProPoint's current Bluetooth connections

are available nearby, you can swap between them by holding

the center button while switching 

OFF

 then 

ON

 again using

the On/Off switch.

 

 

While holding down the mouse front button, move the switch

on the underside of the mouse to 

ON

. Release the front

button once the LED starts to flash orange. 

If the button is held for more than 5 seconds, the mouse will not

pair via Bluetooth. The LED will flash green & the mouse will enter 

USB Receiver (sold separately) pairing mode.

Connecting ProPoint via USB Receiver

To connect via the USB Charger/Receiver, plug the USB 

Charger/Receiver into a port on your computer & move the 

switch on the underside of the mouse from the 

OFF 

to the 

ON 

position. The mouse will automatically connect to your computer.

 

 

 

When not using the mouse for brief periods, dock the mouse 

on the USB Charger so it maintains a charge. 

 
The mouse should be fully charged periodically.  

When not using the mouse for extended periods, move the

switch on the underside of the mouse to the 

OFF

 position.

 

IMPORTANT

Install the 

SWIFTPOINT CONTROL PANEL

 to configure 

your ProPoint mouse to perform exactly as you want it to.  

Set the cursor speed, scroll speed & direction, assign button

functionality & much more. The driver will be updated 

periodically to add & improve functions.   

Отзывы: