Swift MONZA CAMPERVAN 2022, Руководство пользователя

Страница: 73 / 106

72
FI
T
T
ED EQ
UIP
EM
N
T
9.6 Swivel seats
To turn the swivel, slide the BLACK lever
rearwards and adjust to the required angle.
Before driving off ensure the locking mechanism
is fully secure.
9.7 Omnistep slide-out step
Electric Step Operation
On vehicles fitted with an electric step, this is
operated with a switch near the entry door.
Press one side of the switch to extend the step,
the other side to retract the step.
If the engine is started the step will move in
automatically, after a short warning buzzer. If
this operation fails due to an obstacle a buzzer
will sound continuously to warn that the step is
still out, and therefore requires your attention.
WARNING:
Ensure you stand to the side of
the step when operating it.
Maintenance
Dirt and frost can prevent the step from
operating properly. In this case the rails and
moving parts should be cleaned or defrosted.
In case of electric break down
If the step does not retract by the motor
• Remove the front plate of the step. (Fig. 1)
• Remove the connection between the
footboard and the arms (with screwdriver and
wrench S10).
• Slide out the footboard.
• Reinstall the front plate.
Current drawn
• Working current: 5 A
• Blocking current, when fully extended or
retracted: 14 A
Fig. 1 Front plate
9.8 Care of laminate tops, tables,
furniture and doors
DO NOT use abrasives, chemically treated cloths
or aggressive detergents as these may cause
damage.
DO NOT place hot objects on laminated surfaces
i.e. tops, tables. Any temperatures 70°C and over
will cause permanent damage.
Clean worktop surfaces, furniture and door
fascias with a soft, slightly damp cloth, dry off
with a soft cloth.
9.9 Furniture doors
During normal travelling, vehicle vibration and
flexing may cause some of the furniture doors to
become out of alignment. For your convenience
many hinges are adjustable.
9.10 Table storage
Forward Dining tables should be left in the fixed
position on the back of the rear seat when in
transit.
To avoid damage, care must be taken when
removing tables from thier stored positions.