Swift Group Basecamp 2018 Скачать руководство пользователя страница 94 | Manualshive

Страница: 94 / 159

background image

FITTED EQUIPMENT

93

!

WARNING:

• Appliances and accessible parts become

hot during use.

• Avoid touching heating elements.
• Children less than 8 years of age shall be

kept away unless continuously supervised.

• This appliance can be used by children

aged from 8 years and above, persons
with reduced physical, sensory or mental
capabilities and/or lack of experience and
knowledge only if they have been given
supervision or instruction concerning
use of the appliance in a safe way and
understand the hazards involved.

• Children shall not play with the appliances.
• Cleaning and user maintenance shall not

be made by children without supervision.

• Unattended cooking on a hob with fat or

oil can be dangerous and may result in
fire.

• Never extinguish a fire with water, switch

off the appliance and cover flame with lid
or fire blanket.

• Danger of Fire: Do not store items on the

cooking surface.

• Do not use harsh abrasive cleaners or

sharp metal scrapers to clean the oven
door glass since they can scratch the
surface, which may result in shattering of
the glass.

• Never use a steam cleaner to clean

appliance.

Introduction

These appliances are designed for cooking
foods, any other use is incorrect and
dangerous. Failure to install the appliances
correctly or improper use, will invalidate any
warranty or liability claims.
This appliances must be installed in
accordance with the local, national and
European regulations in force. Particular
attention shall be given to the requirements
regarding ventilation. Read the instructions
before using the appliances.

Our policy is one of continuous development
and improvement. Specifications and
illustrations may change subsequent to
publication.

Provision of ventilation

The use of a gas cooking appliance results in
the production of heat, moisture and
products of combustion in the room in which
it is installed. Ensure that the kitchen is well
ventilated especially when the appliance is in
use: keep natural ventilation holes open.
Prolonged intensive use of the appliance
may call for additional ventilation, for example
opening of a window.

Thetford hob 900 Series

Read the safety instructions and information
on use and maintenance of the hob carefully
before continuing. This will enable you to
use the hob safety and efficiently. Retain this
manual for future reference.
For the latest version of the Thetford Manual,
please visit

www.thetford-europe.com

Symbols

Key symbols:

!

WARNING

Risk of injury and/or damage

CAUTION

Hot surface. Risk of injury

and/or damage

ATTENTION

Important information

Safety

!

This appliance may be used by children

aged 8 years or older and persons with
reduced physical, sensory or mental
capabilities and/or lack of experience and

HOB

Back to section menu

«
...
92
93
94
95
96
...
»

Содержание Basecamp 2018
































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Basecamp 2018

Бренд: Dutchmen Страницы: 3

Бренд: Fleetwood Страницы: 66

Бренд: Fleetwood Страницы: 62

Бренд: Fleetwood Страницы: 94

Бренд: Jayco Страницы: 201

1994 Cruise Air

Бренд: GBM Страницы: 40

Бренд: THOR Страницы: 124

Бренд: Winnebago Страницы: 104

Бренд: Winnebago Страницы: 203

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды