Button Press
and Hold
LED State
Action
Less than 1 sec
No Change
None
1 - 5 sec
Green ON<>OFF
Manual Outlet Toggle
5 - 10 sec
No change
None
10 - 15 sec
Blue ON
Network Pairing Mode
More than 15 sec
OFF
None - button press ignored
LED COLOR CODE
DESCRIPTION
Green
Blue
Red
ON
OFF
OFF
Outlet ON, Radio Connected
OFF
OFF
OFF
Outlet OFF, Radio Connected
OFF
Flash
OFF
Radio network pairing mode
Off>On
On>Off
OFF
PAIRING OK
Blue on solid for 5
sec, LED (Green) indicates state
OFF
OFF
Flash
PAIRING FAIL
after 60 sec
OFF
OFF
Flash
Network Connection FAIL
Push to
Install
Side Latches
IMPORTANT SAFETY INSTRUCTIONS
Model No.: WI001UWA
INSERT BUTTON ACTIONS
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
FCC NOTE:
!"
NOTE:
#$$%$&'*+/!
+*34!447
478!74-
%
!747449
- Reorient or relocate the receiving antenna.
&%!
&$!
- Consult the dealer or an experienced radio/TV technician for help.
Important note:
#$$#/74!=4!!
/4#/!"!
LED INDICATOR CHART
SAVE THESE INSTRUCTIONS
PROBLEMS or QUESTIONS:
% !
Swidget Outlet or Insert, contact our tech support team:
For the most up-to-date product support, accessories,
electronic (PDF) format manuals and more, visit
www.swidget.com
No user serviceable parts in this unit.
If you have problems with the router, please consult the
manufacturer for the appropriate support
OPERATION:
MANUAL OUTLET SWITCHING - Works with radio connection only
1. Lightly press Insert push button and hold for 1-5 seconds then release. Outlet will toggle state.
Wi-Fi NETWORK PAIRING/JOINING
'?4%'*&'@HJ%4K?QX 4J/
Wi-Fi operations are possible during this activity.
2. Follow App based pairing steps for Wi-Fi connection.
3. Insert will remain in pairing mode for up to 60 seconds. If successful, LED will be solid blue for 5 seconds then return to the normal operational state. IF FAILED to connect after 60 seconds, red LED will
4Z&#%74
INSTALLATION:
1. TO AVOID SHOCK OR DEATH, IT IS RECOMMENDED TO TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT
THE POWER IS OFF BEFORE INSTALLING OR REMOVING INSERT.
2. This device is to be installed in a Swidget outlet ONLY.
3. Orient the Insert to line up with the pins in the Outlet cavity. NOTE: alignment pins will prevent incorrect installation.
4. Push Insert into the Outlet cavity until the two side latches engage.
5. Re-enable power to Outlet.
]#7% 4^4_`4HK
b. For Inserts being moved, the Insert will power up with the previous location settings.
7. Search Google Play or Apple App store for “Swidget”.
DESCRIPTION:
4$4zZ&#${|%4|!7H^}$zJz??QX~KH
K!444Z&#${|%"!=H=zKz7%
then be monitored and setup for use.
FEATURES:
• USB Power - 5VDC@2A (BC1.2)
• One controlled AC receptacle (marked “CONTROLLED”)
• Remote ON/OFF control via wireless router
• Local and Remote modes available
• Manual ON/OFF control via front panel push button
•
One ALWAYS ON AC receptacle
• Independent power monitoring of both AC receptacles
• Wi-Fi
Compatible
|Q%J=??QX=JX|QXzJ?Z%8=J=zQX_$Q%#%QXZ%XQz|?Q|QZ%8=Jz8QXQ%$Q%z8%%QX
=JXZ%??z%X8QZ==J
WARNING AND CAUTIONS:
• WHILE NOT REQUIRED, IT IS RECOMMENDED TO AVOID ANY RISK OF SHOCK OR DEATH, TURN OFF POWER AT CIRCUIT BREAKER OR
FUSE AND TEST THAT THE POWER IS OFF BEFORE INSTALLING OR REMOVING ANY INSERT.
• J
• For INDOOR use only: 32-104F (0-40C).
• Use only appropriate Class 2 connectors with interconnecting cables.
• Any output cable connected to the Class 2 output shall be routed away from the receptacle outlet slots or any plug/cord inserted into the receptacle.
• Class 2 output connections are not intended for supporting products or appliances.
• #!9^!47/4447"44
instructions to check compatibility.
• Do not use Wi-Fi devices to control electric heaters or any other appliances which may present a hazardous condition due to unattended or
• unintentional or automatic power on control.
• Double check any external Wi-Fi programming for accuracy before using them.
• Insert can only be installed in one orientation. Rear alignment pins prevent incorrect installation. Do not forcibly install an Insert.
• For reference, the controlled Swidget receptacle is marked on the face as “CONTROLLED”.
• Do not exceed the load rating for the Swidget outlet:
• Resistive:
1800W
• 9*@8
• Inductive: 8A@125VAC (PF0.4)
• %!
• Actual wireless performance in a home depends on the numbers of walls/obstacles between the Insert and wireless router.
• Use with Swidget Outlet Model Number R1015SWA.
Wi-Fi C USB
USB Output 5V@2A
© 2018 Swidget Corp. The Swidget logo and “Power to live smart” are registered trademarks of Swidget Corp.
