SPECIAL WAtEr
InnovAtIon
Anchor Buoy – Repair Instructions
1a: Insert end of belt (the end without the loop)
through the exit guide.
1b: Secure the belt to the drum with a self-tapping
screw.
1c: Wind belt clockwise onto drum.
note: keep the belt tensioned by occasionally
pulling it tight onto the drum.
2a: Install the machine screw (M6 x 60) through the
exit guide assembly with the counter-sunk head
on the belt side.
2b: Mount the plastic shim and the spring coil bea
ring onto the machine screw installed on the exit
guide assembly.
3a: Support the spring coil
on a suitable platform so
that the spring coil and the
slot in the center hub are
at the same height.
3b: Make sure that the spring
coil orientation is exactly
as shown in the picture.
