Swarts Tools SW2000, Инструкция и информация о гарантии, Страница: 12 / 16

INSTRUCTION BOOKLET
10
INSTRUCTION BOOKLET
STORAGE 10.0
Store the tool, instruction manual and all accessories in a secure, dry place. In this way you will always have the
information and parts ready to hand.
ENVIRONMENT 11.0
When the time comes to dispose of this product please consider the environment and take it to a recognised recycling
facility instead of disposing with general household waste.
Call your local council, wate management centre or recycling centre for information on the recycling and disposing of
electrical products.
FAQ 12.0
Why does my Multi tool stop sometimes?
Excessive heat or a jammed accessory will cause the tool to shut down. Wait for it to cool down before restarting.
Why can’t I cut/sand as demonstrated?
Grip the tool firmly, the oscillations can be absorbed by your arm and wrist reducing the effective cut. Ensure the
work-piece is also securely gripped. Make sure the cutting tool is in good condition and the variable speed is at a
suitable level.
The Multi tool won’t start, what’s wrong?
a) clean as described in the maintenance section
b) check the power is live and correctly connected and also make sure the switch and speed control are working and
being operated correctly.
Where should I store my Multi tool?
In a dry place at a stable temperature between 10’C and 24’C (50’F and 75’F)
What should I do if my Multi tool gets wet?
Safely remove from any electrical source. Store in a dry place for at least 14 days in a warm but not hot place and
ensure there is no residual moisture before future use.
How can I get my Multi tool repaired if it is damaged?
Contact your retailer.
Where do I find my Item number?
On the left hand side of the body.
Where can I get replacement parts or advice?
Ask at your retailer or visit www.Swartstools.com.au
How long is the warranty and what is covered?
Please see the back cover.