Swarts Tools SW1045 страница 8 Скачать руководство пользователя

Страница: 8 / 16

INSTRUCTION BOOKLET

SAFETY RULES FOR LASER LIGHTS

WARNING!

Do not stare directly at the laser beam.

WARNING!

It may be more difficult to see the laser line in conditions of bright sunshine and on certain surfaces. A

hazard may exist if you deliberately stare into the beam, please observe the following laser safety rules.

1. The laser should be used and maintained in accordance with the manufacturer’s instructions.

2. Never aim the beam at any person or an object other than the work piece.

3. The laser beam should not be deliberately aimed at personnel and must be prevented from being directed towards the

eye of a person for longer than a quarter of a second.

4. Always ensure that the laser beam is aimed at a sturdy work piece without reflective surfaces. For example rough

surfaces or wood are acceptable. Bright shiny reflective steel or the like is not suitable for laser use as this could reflect

the laser back at the operator

5. Do not change the laser light assembly with a different type. Repairs must be carried out by the laser manufacturer or

an authorized agent.

CAUTION!

Use of controls or adjustments or performance of procedures other than those specified herein may result in

hazardous radiation exposure.

1. Laser assembly

2. Laser light on/off switch

3. Laser cover

4. Laser pitch control

5. Saw arm 6. Release knob

7. Operating handle 8. Carrying handle

9. Upper fixed blade guard

10. Clamp assembly 11. Clamp assembly lock (x2)

12. Rotating blade guard

13. Guard retraction arm 14. Blade bolt cover

15. Dust bag

16. Bevel lock

17. Bevel scale

18. Fence

19. Blade wrench 20. Hex Keys (6mm)

21. Mitre Table

22. Mitre Scale

23. Table insert (kerf plate) 24. Switch trigger

25. Mitre lock 26. Spindle lock button

27. Dust Extraction Port

28. Slide bars

29. Slide lock 30. Trenching depth adjustment screw

31. Trenching stop 32. Trenching depth lock nut

33. 45” Bevel adjustment screw

34. 0” Bevel adjustment screw

35. Release latch 36. Side support bars (x2)

37. Side support bar location holes (x2) 38. Clamp assembly 39. Positive Stop Knob

Содержание SW1045

















Результаты поиска

Содержание SW1045

Отзывы:

Похожие инструкции для SW1045

Бренды по названию

Популярные бренды

Swarts Tools SW1045, Инструкция пользователя

Результаты поиска

Содержание SW1045

Отзывы:

Похожие инструкции для SW1045

Бренды по названию

Популярные бренды