swaploader SL-214, Руководство по эксплуатации и частям

Страница: 28 / 106

Section II: Installation
2.0.INS.SL-214
100 SERIES SUB-FRAME CRITICAL DIMENSIONS
LIFT BAR DETAIL
NOTE:
1.
A STRUCTURAL JIB CONTACT POINT LOCATED AS LOW AS ALLOWABLE ON THE CONTAINER FRONT IS REQUIRED.
2.
WELD HOOK GUARD TO BODY OR ADD STRUCTURAL SUPPORT AS NEEDED FOR THE APPLICATION.
3.
THIS DRAWING PROVIDES THE CRITICAL SUB-FRAME DIMENSIONS FOR COMPATABILITY WITH THE SWAPLOADER
HOOK LIFT HOIST. IT IS THE SUB-FRAME SUPPLIER’S RESPONSIBILITY TO PROVIDE A SUB-FRAME OF SUFFICIENT
CAPACITY WHICH PROPERLY SUPPORTS THE BODY/CONTAINER WHEN USED WITH THE HOOK LIFT HOIST.
4.
SWAPLOADER MANUFACTURED 100 SERIES A-FRAMES REQUIRE A 5 INCH LONGSILL HEIGHT.
100 SERIES SUB-FRAME DIMENSIONS
HOIST COMPATABILITY A
SL-75/95/105 82 1/2” [2096 mm]
SL-145/160/180/185/212/214 95 1/2” [2418 mm]
2-16