BabyCam Monitor
www.swannsecurity.com
10. Technical Specifications
Quick Start Guide
FCC WARNING STATEMENT:
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation
SW231-FLO
STOP
If this product does not work when you first plug
it in or you have any concerns, don’t take it back
to the store!
Use the Installation Guide / Manual in the pack, or
Visit www.swannsecurity.com/help
for FAQs, troubleshooting hints & more, or
Contact our expert Tech Support Team...
United States
1-800-627-2799
1-877-274-3695
Sun 4pm-12am, Mon-Fri 8am-12am (PDT)*
Australia
1300 138 324
Mon 9am-5pm, Tues-Sat 1am-9am (AET)
New Zealand
0800 479 266
Mon 11am-7pm, Tues-Sat 3am-11am (NZDT)
International
+61 3 8412 4610
Mon 9am-5pm, Tues-Sat 1am-9am (AET)
*Hours vary during daylight savings times
has the answers
Monitor
Frequency:
2.4GHz
Transmission Range:
150’ (50m)
Channel:
3 Selectable channels
Antenna:
Built-in omni-directional
Display:
LTPS-TFT 1.5” LCD Full colour
Dimensions:
3.1 (L) x 1.9 (W) x 4.7 (H)
79.9 x 49 x 119.9 mm
Weight:
5.29 oz (150 grams)
Power:
DC 6V or 4 x AAA
Operating temperature: 32°F~104°F (O°C~40°C)
Camera
Frequency:
2.4GHz
Antenna:
Built-in omni-directional
Image sensor:
1/3” CMOS image sensor
Effective pixels:
NTSC: 510(H) x 492 (V)
CCIR: 628(H) x 582(V)
Lens:
f6.0mm, F 1.8
Dimensions:
3.1 (L) x 2 (W) x 4.4 (H) inches
79.5 x 50 x 111 mm
Weight:
3.88 oz (110 grams)
Power:
DC 6V
Operating temperature: 32°F~104°F (O°C~40°C)
The BabyCam Monitor includes two colored rings to
chage the appearance of the Flower Camera. Use a
pin or flat sharp edge to remove the current ring if
necessary.
9. Miscellaneous Features
WARNING
: Keep camera & monitor out of children’s
reach. Do not place camera in or on any part of the cot.
