8/16 Channel Digital Video Recorder
25. Protocol Set
You must set the correct protocol so you can control a Pan Tilt camera (Speed Dome) via the DVR.
Move the cursor to Protocol Set, then push the Enter button, and the protocol set window will
appear. Push the up or down button to move the cursor, and press “ADD” or “DEC“ to change the
value.
CHANNEL SEL: If you have a speed dome camera, select the channel which the camera is
connected to.
BAUDRATE: Changeable from 1200bps to 19200bps. The default value is 2400bps.
DOME ADDR: The address of the speed dome camera, changeable from 0x00 to 0xff.
PROTOCOL: The protocol of speed dome camera: pelco-p, pelco-d, neon, or lilin.
DVRPROTOCOL: The protocol used by the computer or keyboard to control the DVR, please
refer to appendix A
DVRADDRESS: The address of the DVR for DVRPROTOCOL, can be changed from 0x00 to
0xff
DVRBAUDRATE: The baud rate of the DVR for DVRPROTOCOL.
17