8/16 Channel Digital Video Recorder
IP MODE: the DVR has 2 IP mode, STATIC IP and DHCP, if you select STATIC IP, you can set
the IP address manually, if you select DHCP mode, the DVR will automatically get the IP address.
For STATIC IP, press upward, downward, leftward or rightward button to move the cursor among
the digits, you can press ADD and DEC button to modify the digits, also, when selecting a digit,
you can press enter button then press left or right button to select each digit, and then press ADD
or DEC button to modify this digit, press enter to save you change.
NETWORK ENV: the DVR has three types of different network conditions: LOCAL,
EXTER_LAN, EXTER_WAN. If in local network, please select LOCAL. If for internet use,
please choose EXTER_LAN. If the internet condition is not very good, please select
EXTER_WAN.
VIDEO PORT: the video transmit port for the computer. Default is 5000.
COMMAND PORT: the command transmit port for the computer. Default is 5001.
If you change any of the VIDEO PORT and COMMAND PORT or MAC address, you have to
restart the DVR before you use the “net viewer” software.
Note:
if you have change the MAC address, you can not see the “MAC ADDR SET”.
17. N/W Enable Set
When the cursor moves to N/W Enable, push the Enter button, and the N/W Enable setup window
will appear.
11
