12
!
!
• Make sure charger is securely inserted into electrical outlet.
• Make sure charging plug is securely inserted into handle.
• Indicator lights stop blinking when fully charged.
• Empty dust cup and clean or change filters. See page 11 for
maintenance instructions.
• Make sure cleaner is fully powered. Charge battery.
• Remove clogs that restrict the airflow.
• Make sure cleaner is fully powered.
• Charge battery for 4 hours before using.
•
Check brush roll for debris. See page 11 for maintenance instructions.
Make sure vacuum cleaner is off, and charging plug is unplugged.
This vacuum cleaner has a special thermostat that protects it in case of motor overheating.
If
the vacuum suddenly shuts off
, proceed as follows: 1) Check the vacuum for a possible source of
overheating such as a full dust cup, blocked wand or clogged filters. If these conditions are found, fix
them and wait at least 30 minutes before attempting to use the vacuum.
2) After the
30 minute
period, press the power button. If the vacuum still does not work, call the Eureka
| Swan Customer Service
HELPLINE
at
0333 220 6050
.
Problem
Solution
N O T I C E : Thermal cut-off
Motor will not start
Charging indicator lights are
not lit while charging
Not enough
suction power
Plush brush roll will not turn
Not enough running
time
• Make sure cleaner is fully powered.
• Push charger securely into electrical outlet, try another outlet
or check circuit breaker.
• See detailed “thermal cut-off” instructions above.
Discarding the vacuum and battery pack
Before you discard this vacuum, dispose of battery in an environmentally safe manner.
Do not discard battery with your regular household trash.
TROUBLE-SHOOTING
SC15822N_24N_IM.indd 12
29/04/2019 16:24
