10
A-96.730.121 / 160920
Chematest 35
Initial Setup
3.4. Activating Expert Mode
The user can choose between two types of method guidance for
photometric measurements. This setting can be changed under
<Menu>/<Settings>/<Miscellaneous>/<Expert mode>.
Inactive (default setting):
In this mode, the Chematest 35 displays detailed on-screen
instructions. Recommended for inexperienced users.
Active:
In this mode, the Chematest 35 displays the instructions in
shortened form and requires as few confirmations from the
user as possible.
3.5. Setting up Favorites List with Fixed Entries
By default, the instrument is configured to display the last three
methods selected from the method catalogue [B] in the favorites
list. With this configuration, the favorites list is automatically adjust
-
ed each time a method is selected from the method catalogue.
Alternatively, it is possible to set up a favorites list with fixed entries.
To do this, perform the following steps:
1
Select the required methods from the method catalogue [B] in
reverse order: First method 3, then method 2, then method 1.
The measurements can be canceled immediately after selection
by pressing [Exit].
2
Navigate to <Menu>/<Settings>/<Miscellaneous>/<Method
save> and select "No".
The favorites list contains the three methods just selected
and will remain in this state.
A
B
Favorites list
Method catalogue
83%
[Method 1]
[Method 2]
Main Menu
[Method 3]
Method Catalogue
Menu
A
B
