AMI Solicon4
Program List and Explanations
A-96.250.321 / 191015
55
3 Maintenance
3.1 Calibration
Follow the commands on the screen. Save the value with the [En-
ter] key.
3.2 Simulation
To simulate a value or a relay state, select the
alarm relay,
relay 1or 2
signal output 1or 2
with the [
] or [
] key.
Press the [Enter] key.
Change the value or state of the selected item with the [
] or
[
] key.
Press the [Enter] key.
The value is simulated by the relay/signal output.
At the absence of any key activities, the instrument will switch back
to normal mode after 20 min. If you quit the menu, all simulated val-
ues will be reset.
3.3 Set Time
Adjust date and time.
Alarm Relay:
Inactive or active
Relay 1 and 2:
Inactive or active
Signal Output 1 and 2:
Actual current in mA
Signal Output 3 (option):
Actual current in mA
