A-96.250.491 / 190121
AMI Deltacon DG
Program List and Explanations
56
9.
Program List and Explanations
1 Messages
1.1 Pending Errors
1.1.5
Provides the list of active errors with their status (active, acknowl
-
edged). If an active error is acknowledged, the alarm relay is active
again. Cleared errors are moved to the Message list.
1.2 Maintenance List
1.2.5
Provides the list of necessary maintenance. Cleared maintenance
messages are moved to the Message list.
1.3 Message List
1.3.1
Shows the error history: Error code, date / time of issue and status
(active, acknowledged, cleared). 65 errors are memorized. Then the
oldest error is cleared to save the newest error (circular buffer).
2 Diagnostics
In diagnostics mode, the values can only be viewed, not modified.
2.1 Identification
Desig.
:
Designation of the instrument.
Version
: Firmware of the instrument (e.g. V6.21-04/17)
Degasser:
Firmware of the degasser (e.g. 2.00)
2.1.4
Factory Test
: Test date of the Instrument, Motherboard, Frontend,
Degasser
2.1.5
Operating Time:
Years / Days / Hours / Minutes / Seconds
2.2 Sensors
2.2.1
Conductivity
:
2.2.1.1
Sensor 1
: Shows the
Current value
in µS
Raw value
in µS
Cell Constant
2.2.1.2
Sensor 2
: Shows the
Current value
in µS
Raw value
in µS
Cell Constant