AMI Codes-II
Program List and Explanations
A-96.250.571 / 050517
77
2.3 Sample
2.3.1
Sample ID:
Shows the identification assigned to a sample. This
identification is defined by the user to identify the location of the
sample.
Sample Flow:
Shows the actual sample flow in B/s (bubbles per
second)]. The Sample flow must be above 5 B/s.
Temperature:
Actual temperature in °C and in Ohm
(NT5K)
2.4 I/O State
Shows current status of all in- and outputs.
2.4.1/2.4.2
2.5 Interface
Only available if optional interface is installed.
Review programmed communication settings.
Alarm Relay:
Active or inactive
Relay 1 and 2:
Active or inactive
Input:
Open or closed
Signal Output 1 and 2:
Actual current in mA
Signal Output 3:
Actual current in mA (if option is installed)
