82
A-96.250.581 / 220616
AMI Codes-II CC
Program List and Explanations
2.4 I/O State
Shows current status of all in- and outputs.
2.4.1 & 2.4.2
2.5 Interface
Only available if optional interface is installed.
Shows the programmed communication settings.
3 Maintenance
3.1 Calibration
In this menu, you can correct measuring values (disinfectant and
pH) or calibrate offset and slope of pH electrode.
3.1.1
Free av. chlorine
: Possibility to correct the free available chlorine
value.
Process Calibration of tc & fc, p. 51
, for more details.
3.1.2
Total chlorine 2:
Possibility to correct the total chlorine value. See
Process Calibration of tc & fc, p. 51
, for more details.
3.1.3
Process pH:
Only available, if option pH has been installed. Cor-
rection of pH electrode. See
Process Calibration of tc & fc, p. 51
,
for details.
3.1.4
Standard pH:
Only available, if option pH has been installed. Cali-
bration of pH electrode with the two standard solutions pro-
grammed in Installation 5.1.3. See
, for details.
3.2 Service
3.2.1
Verification:
Performs a verification using the reference kit. Follow
dialog. See
3.2.2
Fill System:
Activates the reagent pump. The function Fill System
is used to fill or flush the reagent tubes.
Alarm Relay:
Active or inactive
Relay 1 & 2:
Active or inactive
Input:
Open or closed
Signal Output 1 & 2:
Actual current in mA
Signal Output 3:
Actual current in mA (if option is installed)
