32
Capture: Capture
Each camera input on your DVR will be displayed as CH1, CH2, etc.
Auto Capture:
When enabled, your DVR will take a snapshot each time an
event occurs.
Stream Mode:
Leave the default selection. This allows you to select the cam-
era’s native resolution (Alarm Resolution).
Normal Interval:
The length of time that must elapse before a snapshot is
taken. For example, when setting a Normal capture schedule, a snapshot
will be taken every 5 seconds using the default selection. Adjust accordingly.
Alarm Interval:
When setting a Detection capture schedule, a snapshot will
be taken each time motion has been detected according to the interval se-
lected. Adjust accordingly.
Alarm Resolution:
Leave the default selection. This will save each snapshot
at the camera’s native resolution. A lower resolution can be selected.
Alarm Quality:
Leave the default selection. This will save each snapshot at
the camera’s highest bitrate.
As this is an added feature, a capture schedule is not enabled by default. To
enable this (see page 33 – Capture: Schedule).
As an added feature, you can enable and set a
schedule for your DVR to take a snapshot each
time an event occurs. This is particularly use-
ful for finding motion events quickly and can
also be used for different purposes such as
time lapse photography.
→
Use the “Copy” function to apply all set-
tings to the other cameras connected.
→
Click “Default” to revert to default settings.
→
Click “Apply” to save settings.
Содержание 2K Series
Страница 1: ...2K Series 1080p Smart Security System INSTRUCTION MANUAL ...
Страница 5: ...Contents 5 Help Resources 61 ...
