SWAGTRON ZIPBOARD, Руководство пользователя

Страница: 17 / 30

3.2. HOW IT WORKS
The Shuttle Zipboard Swagboard uses an internal gyroscope
with acceleration sensors to move based on your center of
gravity. Do not bend at the waist. The movement will be
mostly in your ankles.
MOVE FORWARD
Shift your weight forward to move straight ahead.
STOP
Lean back to slow down, keep one foot on the back pedal
while slowly lifting the foot off the front pedal to disengage
the shuttle (two beeps).
TURNING LEFT
Shift your weight slightly heelside on the BACK PEDAL to
turn left.
TURNING RIGHT
Shift your weight slightly toeside on the FRONT PEDAL to
turn right.
STEPPING OFF
With the zipboard completely stopped, step back with your front foot (LED side), then step off with your back foot (non-LED
side). Be careful when stepping off for the first time.
CAUTION
The Shuttle Zipboard Swagboard has an inertial dynamic stabilization system that keeps you upright. However,
it will stop detecting you if you lean too far left or right or if you take a foot off of the board. Slow down before
turning or you will fall off and be injured.
BACKWARD
Shift your weight
backward ≤1 0
o
STOP
Align your body to
an upright, straight
position
FORWARD
Shift your weight
forward ≤1 0
o
X X
L