VCR
®
Split-Nut
TM
Installation Instructions
VCR Gland
Split Half
Split Half
Hex Collar
Female VCR Split-Nut
1.
Place two female split nut halves
➀
around the VCR
gland shaft so their ends are flush. Slide the split
halves against the back of the gland flange.
2.
Thread the larger opening of the hex collar over the
split halves by turning it
counterclockwise.
Tighten
hex collar slightly using an 11/16 in. wrench on the
split nut halves and a 3/4 in. wrench on the hex col-
lar.
3.
To remove, turn the hex collar
clockwise
.
➀
You must use a set with one split nut half marked
with the Swagelok logo and one split nut half
marked with the words “VCR PAT’D.”
Содержание VCR Split-Nut
Страница 6: ...www swagelok co jp VCR Split NutTM...
Страница 7: ......