Swagelok TF16, Руководство пользователя, Страница: 13 / 24

Tube Facing Tool User’s Manual 13
Installing the Collet Set
1. Insert the collet set into the body by pressing the collet
halves together and setting into the collet housing.
Note: TF24 series, line up the unthreaded set point on the
collet set with the red dot on the collet housing. (The collet
lock will thread into the threaded hold on the other half of
the collet set.)
2. TF16 series: Secure the collet set by turning the tube clamp
clockwise until it stops.
TF24 series: Secure the collet set by turning the collet lock(s)
clockwise one turn. Turn the tube clamp clockwise until it
stops.
Removing the Collet Set
To remove a collet set, loosen the collet lock(s) and tube clamp
until the collet set can be removed by pressing the collet set
halves together through the opening in the collet housing.
Fig. 14 Insert the collet set into the body
Fig. 15 TF16 Series
Fig. 16 TF24 Series
Collet lock
Tube
clamp
Opening
Tube clamp
Opening