Swagelok TF16, Руководство пользователя, Страница: 12 / 24

12 Tube Facing Tool User’s Manual
Installation of the Cutting Insert and the
Tool Holder
•
CAUTION
Do not touch the sharp cutting edges while mounting
the multifunctional tool Wear protective gloves
Cutting Insert
Attach the cutting insert to the tool holder with the curved side
of the insert away from the tool holder. Use the included T15
Torx driver to tighten the screw.
Tool Holder
Select a tool holder based on the tubing size.
Tool Holder
Style
Possible Application
Bevel
Angle TF16 TF24 TF48
Squaring Beveling [°] Tube OD, inch (mm)
Standard x – – 0.236 to 1.00
(6.0 to 25.4)
0.236 to 2.50
(6.0 to 63.5)
0.236 to 3.00
(6.0 to 76)
Optional x – – 0.118 to 0.236
(3.0 to 6.0)
0.118 to 0.236
(3.0 to 6.0)
–
Optional x – – 0.500 to 1.00
(12.7 to 25.4)
0.500 to 2.50
(12.7 to 63.5)
–
Optional x – – – 0.118 - 0.835
(3.0 to 21.2)
0.250 - 0.835
(6.35 to 21.2)
Optional – x 30° 1.00 (25.4) max. 1.378 (35.0)
max.
2.374 (59.3) max.
Optional – x 35° 1.00 (25.4) max. 1.339 (34.0)
max.
2.335 (60.3) max
Contact your authorized Swagelok sales and service
representative for information on optional tool holders.
•
WARNING
Switch off the tool and remove the plug from the
power outlet or take out the removable battery
before changing tooling, performing maintenance, or
transporting the tool
Install the tool holder into the tube facing tool lining up the hole
on the tool holder with the screw hole in the center of the tube
facing tool.
Fig. 12 Installing the Cutting Insert
Fig. 13 Installing the Tool Holder, TF16
and TF24 series