Push-On Tool User Manual
Contents
Push-On Tool
Mandrels (3 short, 2 medium, 2 long)
Push-On Tool Components
Pusher handle
Vise handle
Jaws
Vise
Mandrel
Limiting spring
Pusher
Mounting holes
(6)
Lubricant
Страница 1: ...Push On Tool User Manual Contents Push On Tool Mandrels 3 short 2 medium 2 long Push On Tool Components Pusher handle Vise handle Jaws Vise Mandrel Limiting spring Pusher Mounting holes 6 Lubricant...
Страница 2: ...lubricant 5 Select the appropriate mandrel according to the table Hose Type Nominal Hose Size in Recommended Mandrel Size Rubber 1 4 3 8 1 2 Long 3 4 Medium 1 Short Nylon and Polyethylene 1 4 3 8 Long...
Страница 3: ...ertion gauge C ELD 526A C ELD 526B Proper mark position Improper mark position Insertion of End Connection onto Hose 1 Raise the pusher handle approximately 90 Note The handle should not be moved to t...
Страница 4: ...nection into the hose until the end connection is inserted properly according to the table below CAUTION There is a potential pinch point between the end of the hose and the divider tab Hose Type Inse...
