Swagelok Fast Loop Module, Руководство пользователя

Страница: 42 / 56

Tool Requirements
Spring Kit Contents
Tool size depends on the nominal end
connection size and style. See the chart
below.
Seal Kit Contents
Installation
1. Refer to the flow direction arrow on the
check valve and install the valve in the
correct orientation.
Maintenance
Disassembly
1. Remove the check valve from the
system.
2. Separate the inlet body from the outlet
body.
2. Follow the fitting assembly instructions
for Swagelok, VCR, and VCO fittings.
3. When installing a valve with pipe
fittings or straight thread fittings, follow
standard industry practices.
1. Test the valve to ensure there is no
leakage to the atmosphere.
2. Check for correct cracking pressure.
3. Test the valve to ensure it stops
reverse flow.
Testing
Nominal
End
Connection
Size
Tool Size and Quantity
Wrenches Socket
for body
Hex
Qty. (2)
for End
Connection
Qty. (1)
for body
Hex
Qty. (1)
1/8 in. 11/16 in. 7/16 in. 11/16 in.
1/4 in. 11/16 in. 9/16 in. 11/16 in.
6 mm 11/16 in. 14 mm 11/16 in.
3/8 in. 1 in. 11/16 in. 1 in.
1/2 in. 1 in. 7/8 in. 1 in.
1/2 in. FNPT 1 1/16 in 1 1/16 in 1 1/16 in
1/2 in.
BSP/ISO
1 1/16 in 1 1/16 in 1 1/16 in
8 mm 1 in. 16 mm 1 in.
10 mm 1 in. 19 mm 1 in.
12 mm 1 in. 22 mm 1 in.
3/4 in. 1 5/8 in. 1 1/8 in. 1 5/8 in.
1 in. 1 5/8 in. 1 1/2 in. 1 5/8 in.
22 mm 1 5/8 in. 1 1/2 in. 1 5/8 in.
25 mm 1 5/8 in. 40 mm 1 5/8 in.
Torque wrench to
read 200 in.
⋅
lb
(22 N
⋅
m).
O-ring Poppet Backup Ring
Spring
Outlet
Flow Direction
Arrow
Inlet
Body Hex Wrenches
Service Instructions
CH Series Check Valve
A Swagelok Pre-Engineered Subsystem Fast Loop Module
42