background image

N2000

 QUICK START

Please contact SVSi technical support @ svsiav.com or 256.461.7143 x9900 for any 
installation issues. Visit our support webpage at support.svsiav.com.

       Distribution   Switching   Recording   Windowing   Wall Processing   Control



Southern Vision Systems, Inc. 

 256. 461.7143 

 www.svsiav.com     

SVSi is a trademark of Southern Vision Systems, Inc. in the United States and other countries.
800DOCN2000QSREV2.2

                                                                                                                                                 Made in the USA.

Optional Accessories:

N9312  12V External Power Supply

N9101 Rack Mounting Wings

N9102  1RU Rack Shelf 

N6123  Dual-Channel Networked Video Recorder

           (holds 2 stand-alone units)

N9382  1RU 12V/16-unit power supply

N9206  2RU Card Cage (holds 6 cards)

N2510  4x1 Windowing Processor

Troubleshooting Guidelines

Problem

Possible Solutions

“Local Play” graphic is displayed.

• Verify decoder is assigned to view a valid stream in 

the N-Able matrix.

• Verify decoder is currently in “live play” mode 

(black text on matrix view).

• Verify network is properly configured and set up. If 

needed, connect encoder directly to decoder to 
verify network issues.

“Host Play” graphic is displayed.

• Verify encoder is in live play mode (black text in 

matrix).

• Verify source is attached and is outputting a valid 

signal (DVI light on encoder is lit).

“Unsupported Resolution” graphic 
is displayed.

• Change source resolution to a valid resolution (try 

720p60).

• Verify cabling is correct.

“Copy Protected Content” screen is 
displayed.

• Contact SVSi technical support.

Black screen/no graphic is dis-
played.

• Set decoder to local play. If the local play graphic 

does not appear, check the display input settings 
and cabling.

• If local play appears, set decoder to live play and 

verify network is configured properly.

No Audio is detected.

• If there is no audio on all

 

decoders, verify audio 

settings are correct on encoder.

• If there is no audio on a single decoder, verify 

audio settings are correct on decoder.

Congratulations on the purchase of your N2000 series product — part of SVSi’s family of Networked AV 
products. SVSi’s N2000 product line includes the N2121 and N2141 encoders and the N2211, N2221, 
and N2241 decoders. An SVSi Networked AV system comprises video and/or audio encoders, decoders, 
and other network accessories including recording solutions, multi-window processing, audio-only end 
points, and system controllers. The system allows you to distribute HD Video, Audio and Control across 
a gigabit Ethernet network. Options are available for recording, playback, and wall processing.

Network Bandwidth per video stream = 20-500Mbs (user-selectable). Units can be daisy-chained or connected 
to a gigabit Ethernet layer-3 switch supporting IGMP-query. Please contact SVSi to obtain a pre-configured 
switch, or more details regarding daisy-chaining limitations.

The 

DVI-I

 connector on the N2000 encoder auto-senses either analog or digital video and converts input 

video to network packets for output through the RJ45 connector. Audio can be input as embedded digital 
audio through the 

DVI-I

 connector or as balanced analog audio through the 5-pin phoenix 

AUDIO

 

connector. Both encoder and decoder can be powered either using the 12V optional external power 
supply or by Power-over-Ethernet (PoE).

The N2000 series decoder accepts the network packets and reconstitutes synchronized video and audio 
for display through its 

DVI-D

 port. Digital-only video is output by the decoder. IR and serial commands 

can be transmitted by either encoder or decoder using SVSi's free N-Able configuration software, SVSi's 
N8000-series controller, or using third party controllers. IR and 

RS232

 serial ports are not pass-through 

and must use a central controller to direct commands to each device.

1

N2000 Series Encoder Rear View

7.888

1

2

3

4

5

6

7

8

9

1.050

1) 12VDC Input (not needed with PoE)
2) Status Indicators
3) RJ45 Auto-Sensing Gigabit Ethernet 

Switch Port — PoE*

4) RJ45 Auto-Sensing Gigabit Ethernet 

Switch Port

5) Infrared (IR) Emitter Connection*

6) RS232 Connection
7) Analog Audio Input Connection*
8) Pass-Through DVI-D Connection
9)  DVI-I Digital Input
10) Analog Audio Output Connection
11) DVI-D Digital Output

7.888

1.050

1

2

3

4

5

6

10

11

N2000 Series Decoder Rear View

*Not available  on the N2211 Decoder.

Содержание N2000 series

Страница 1: ...ector Audio can be input as embedded digital audio through the DVI I connector or as balanced analog audio through the 5 pin phoenix AUDIO connector Both encoder and decoder can be powered either using the 12V optional external power supply or by Power over Ethernet PoE The N2000 series decoder accepts the network packets and reconstitutes synchronized video and audio for display through its DVI D...

Страница 2: ...ddress of 169 254 xxx xxx Before attempting configuration some changes must be made to the host PC Steps for IP address configuration for Windows 8 1 Select Control Panel Network and Sharing Center from the Start menu 2 Select Change adapter settings 3 Select the wired interface connected to your AV network 4 Click the Properties button 5 Scroll down in the list to the Internet Protocol Version 4 ...

Страница 3: ...e found on the N2000 sub tab of the Video Matrix screen as shown below In the Video Matrix tab encoder devices are displayed in columns and decoder devices are displayed in rows Mouse over any column or row to view tooltips providing critical information about each device Double click any device to view its control page shown below Enter admin and password as the default username and password Red ...

Страница 4: ...perly configured and set up If needed connect encoder directly to decoder to verify network issues Host Play graphic is displayed Verify encoder is in live play mode black text in matrix Verify source is attached and is outputting a valid signal DVI light on encoder is lit Unsupported Resolution graphic is displayed Change source resolution to a valid resolution try 720p60 Verify cabling is correc...

Отзывы: