35
Alarm Windows Icon explain :
Normal
No signal
Pressure over HIGH
Did not recive data
Pressure over Low
Low battery
Temperature over High
4.6.8.4 Car speed
This function is to detect the Car
’s speed. The accelerator speed cable can be connected to a Hertz
device and it can instantly syncronise the records of the car
’s speed in the DVR. The car speed can
also be detected from the in-built GPS receiver on the DVR. The user can set the maximum speed
limit of the vehicle. Once when the vehicle overspeeds, the system will automatically send out voice
message notifying the driver of the condition and an event data record is also generated in order to
facilitate the information
’s access by the user in future inquiries
Speed Device
Select the speed detection device. It can either be a GPS device or Car speed line cable for the
standard record.
Line Type
If you select the speed line, for the actual car speed reading you need to check the actual value /2 or
/4 in accrodance to the speed line device.
Display Unit
Km or mile can be choosed.
