19
Press the left and right direction button to select the channel which needs to be adjusted.
Press
Enter
to adjust video with selected channel.
4.4
ALARM
The main function for the alarm setting is used on MDVR combining external detection equipment.
At back panel
“ alarm in ”port 1
、
2
、
3
、
4… were to be associated with ALARM SETTINGS 01
、
02
、
03
、
04…. Item.
ACTION / POPUP
: That were to be associated with Camera channel simultaneously.
Ex: ALARM SETTINGS “ 01 ” -- >> “ POPUP ” ; when “ 01 ” alarm trigger, then CH01 video will
show on screen.
ACTION /
OUT1 ( OUT2 )
: That were to be associated with Alarm signal output simultaneously.
Ex: ALARM SETTINGS “ 01 ” -- >> “ OUT1 ” ; when “ 01 ” alarm trigger, then system will pass
signal to external equipment ( such as Warning Light or Door switch ) via
“Alarm OUT1” port.
* When Alarm in event trigger has occur, Alarm icon will swapped color to Red on main screen.
* Then Alarm out event trigger has occur, Relay icon will swapped color to Green on main screen.
TRIGGER SIGNAL
/
HIGH : That mean Alarm trigger by HIGH active voltage.
TRIGGER SIGNAL
/
LOW : That mean Alarm trigger by LOW active voltage
