SVS-Vistek eco4050, Руководство пользователя

Страница: 22 / 138

SVS-VISTEK–Connectors Dual GigE Vision 22
5 Connectors
5.1 Dual GigE Vision
5.1.1 Network (TCP/IP)
Address Assignment
By default, the camera does not have a persistent IP address.
For Dual GigE Vision a “Static Link Aggregation” (SLA) is recommended.
Refer to Teaming.
When forcing an IP address by using the PC internal network dialog,
changes are only valid until the next restart of the Camera.
For a peer-to-peer connection of a GigE camera to a PC a network
address assignment based on LLA (Local Link Address) is recommended.
This involves a network mask “255.255.0.0” as well as a fixed preamble
“169.254.xxx.xxx” of the network address range. A GigE camera will fall
back to LLA when no DHCP server is available and no fixed network
address was assigned to the camera.
5.1.2 Single line operation of dual GigE cameras
Use the upper right network port for single line operation.
NOTICE
Any dual GigE camera can be run as well with a single network connection.
NOTICE
Dual GigE connection is required only if single network connection does not provide
sufficient bandwidth. For dual GigE operation, 2 NICs need to be teamed. NIC teaming is a
feature of the operating system
Figure 6: physical layout
of RJ45 female connector